Switch NES themed Cartrige Holder with holding tab
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another NES inspired Switch cartridge holder
- Rating
- 4 / 5
- Likes
- 8
- Downloads
- 59
- Makes
- 1
- Views
- 389
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Inspired by other cartridge holders, and certainly not the first one, i found other's creations not quite what i wanted, so i decided to do my own. A small tab holds the cartridge in place. simply slot the game in, and either push the cartrige out trough the window, or pull the tab to release the cartridge. You can use PLA, but i found Silk PLA too fragile for the tab to survive more than a couple of uses.
Materials used on the cover photo are from left to right: Silver GST3D PLA, White Kingroon PLA (sanded and spraypainted gray) and black Kingroon PLA ( fresh out of the printer and a bit hairy, please excuse my slightly moist filament )
Print the model as oriented. The model comes with integrated supports, but you may need to tune your slicer to allow for a really thin 0.3 wall (totally doable even on a 0.6 nozzle)