1 / 5
90° Diagonal mirror with 2.5" to 1.25" adaptor — image 1
1 / 5

90° Diagonal mirror with 2.5" to 1.25" adaptor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a 90° Diagonal mirror it connects to the telescope with a 2.5" diameter. and fits tightly to a 1.25" eyepiece.…

Rating
0 / 5
Likes
4
Downloads
66
Makes
0
Views
341
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a 90° Diagonal mirror

it connects to the telescope with a 2.5" diameter.

and fits tightly to a 1.25" eyepiece.

I used an 40x60x3 mm optical mirror that I cut to dimensions. This type of mirror can be found in old overhead projectors or found on amazon.

Mirror is maintained with double sided tape.

Hole size should allow to fit M3*4 screws directly. You can glue the cover for additional support.

If not printed in Black, please note that the plastic will let light shine through so it must be painted if you plan to use id during daylight.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

Rafts:

No

Supports: 

No

Resolution:

200

Infill: 

38

Filament: Sunlu PLA+ blue

 

Tags