1 / 2
Anycubic i3 mega HGX LITE extruder x_carriage — image 1
1 / 2

Anycubic i3 mega HGX LITE extruder x_carriage

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

X Carriage adaptor and all parts to mount direct drive hgx lite extruder onto the anycubic i3 mega.

Rating
0 / 5
Likes
5
Downloads
36
Makes
0
Views
632
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I built this model to mount the hgx lite extruder on the anycubic i3 mega. I used E3D-V6 1.75mm heatsink, TriangleLab CHC KIT Ceramic heating core, Mellow V6 Plus Adapter (15mm total height), a classic v6 nozzle and a 5015 blower fan.

NOTE: This model requires the use of the Mellow adapter (or a Volcano heating element and nozzle)!

You can mount the x_carriage_adaptor onto the original anycubic x carriage using the original m4 bolt. 

To assembly everything you will need 8 m3 threaded insert (outer diameter 4.5mm and 3mm length) and some m3 bolts.

You will need 2 M3 inserts in the x_carriage_adaptor, 4 M3 inserts in the Montaggio_E_V6_1, and 2 M3 inserts in the SV3010_inductive. The placement is easy to identify, the initial part of the holes is larger than 3mm. The holes on the SV3010_inductive for mounting the 30mm heatsink fan are the right diameter for direct screw attachment. To easily mount the fan, you should cut the upper left edge (as shown in the photo).

I printed all parts with cf-petg and 0.15mm layer height.

Tags