Toyota Highlander Cup Holder Swing Tray

This is a replacement cup holder swing arm for the Toyota Highlander middle row cup holder.

NOTE: While this model may not perfectly fit the original part, it is designed to fit the replacement bracket available here on Printables. Thank you @Piperci_489691 for creating the replacement bracket!

For those seeking a matching filament, this one closely matches the tan interior of a 2014 Highlander: Tan PETG Filament on Amazon (paid link). I've found the tan filament useful for various projects, and it comes in a convenient vacuum-sealed bag helping to keep moister out which and is re-usable.

If that's not to your liking, any PETG of your liking should do the job.

Alternatively, if you're looking for a budget-friendly solution, consider these cup holder inserts.

INSTALLATION NOTE:

• Ensure the printed part is positioned outside the metal swing bar when screwing it in, as it may be blocked otherwise due to the model's length.
• The longer design improves handling of larger water bottles but prevents swinging within the bar and top hole.
• Due to the tight fit, press firmly to snap it in place. A flat-head screwdriver can help push the swivel pin in straight. Use caution to avoid injury or damaging the pin.

PRINTING NOTE:

• The model has some issues but prints well with the right settings. Included are the G-code and 3MF file for optimal print settings.
• Key settings include:
  • First layer height: 0.4 mm (helps smooth out model issues)
  • Print with the angled side (bottom/back of the arms) down
  • Enable supports (build plate only) to support the pins
  • Use 4 perimeters and 8 solid top/bottom layers
  • 30% infill is recommended

Thank you for your understanding and enjoy your new cup holder swing arm!