1 / 2
Dagger Knife with Simple Standing Sheath
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printable dagger. Serrated, but don't expect it to hold an edge or survive long term use.
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 310
- Makes
- 0
- Views
- 1,112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Design inspired by the Laffs Dynamics UAMD, but I handmade the step file myself.
I also created a snap fit sheath that stands upright. The sheath sizing ensures that the sharp point is not compromised.
Scale up or down as needed. My hands fit the 150% scale. The print orientation is shown in the build plate picture.
These are the settings I used:
Knife: 8 walls, 50% gyroid infill
Sheath: 4 walls, 20% gyroid infill