SP Connect Square Stem Mount Adapter for Anti Vibration Module
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces the SP Connect Square Stem Mount to directly mount the SP Connect Anti Vibration Module.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 95
- Makes
- 1
- Views
- 760
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The SP Connect Anti Vibration Module comes with a gear-style connector at the back because it is primarily meant to be mounted on motorcycles. The square stem mount found on bicycles featuring a built-in SP Connect mount is not compatible with this gear connector and SP Connect does not offer an adapter.
This model is meant to replace the square stem mount on the bike and the gear connector on the back of the Anti Vibration Module at the same time. Simply unscrew the stem mount from the bike, pull of the gear connector on the rear side of this model, replace with the four-pronged side of this print, and screw back together with this model instead. The screw is placed through the module itself, then through this mounting bracket and into the screw hole in the bike. Tighten with 5 Nm.
Securely mounts the Anti Vibration Module in place and prevents unwanted turning of the entire assembly when mounting and unmounting equipment from the module.
Can be printed in PLA though PETG is probably more weather resistant and offers more longevity. Needs supports.