RPG-2 Fins
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fins and rivets for the RPG-2 rocket model
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 78
- Makes
- 0
- Views
- 587
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are simple fins based on pictures of I found of PG-2 rockets. They appear to be originally riveted on. You will need to print 6 fins and 12 rivets. Then, drill holes in the base of the PG-2 base to press fit in the rivets to hold the fins on. I recommend PLA Pro at a minimum. They will be nice a flexible and can be rolled up and shoved in a launcher or carrier.
Update 4/16/2024): After looking at more detailed pictures of the fins on PG-2s, I made a smaller version of the fins (2" x 3" vs 2.5" x 3.5"). RPG-2 Fin V2
The same rivets will work.
Update 5/4/2024: Adding a jig (RPG-2 Fin Template.stl) for drilling the holes to mount the fins that slides on the tail to make it easy to get the spacing perfect.