FilaDryer S1 W3001 Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parts needed to mount a W3001 temperature controller to the Sunlu FilaDryer S1
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
This mod will increase the maximum temperature of a filadryer to around 70c allowing you to dry filaments like PETG and ABS more effectively
I made this model over a year ago so there won't be great instructions
Bill Of Materials
| Name | Quantity |
| W3001 24v | 1 |
| M3x6 or 8 | 2 |
| M4x6 | 2 |
Printing
filadryer-base.3mf: Perimeters:4, infill:25%, Layer Height:0.1, supports:yes, see note
filadryer-mount.3mf: same as base, but with 0.2 layer height and no supports
Support note: the only place that needs supports is highlighted in the photo, if you use prusaslicer or orcaslicer the paint on supports will import automatically from the 3mf file
Tip:
to improve the accuracy of the temperature probe i recommend putting it in front of the intake of a fan, i use the cobra dri design found here.
