1 / 6
esp32-flight-cam
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the minimalist esp32-cam housing with lower profile and angled camera to be mounted on RC planes, drones ect.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 69
- Makes
- 0
- Views
- 690
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Housing for the esp32-cam module intentionally meant to be used with the very good and simple ESP32-CAM-Video-Recorder-junior from James Zahary.
https://github.com/jameszah/ESP32-CAM-Video-Recorder-junior
Versions for standard or wide-angle lenses.
Printed in
- 0,2mm PLA or in
- 0,3mm LW-PLA (with only around 2,5g! :)
You will need:
- esp32-cam module
- 4MB SD-card (Attention the esp32cam doesn't support larger SD-cards!)
- servo cable
- mini two-way switch (eg:https://amzn.eu/d/aq2HVPg)
- 40mm shrink tube