WiiHero Case - Guitar Hero Wii Controller PC Windows Adapter for CloneHero
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This was printed in Hatchbox PLA at 0.2 layer height. A zip tie is used as cable relief. This case was designed to fit…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 28
- Makes
- 0
- Views
- 1,190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
This was printed in Hatchbox PLA at 0.2 layer height. A zip tie is used as cable relief. This case was designed to fit an Arduino nano and utilizes software and Arduino code which can be found on Github at https://github.com/jkctech/WiiHero If you are building this project for the first time, make sure you download the creators latest software in the releases section as the software in the main directory is old and does not work. Arduino nano is hardwired to a 4 pin RJ-11 cable which uses the Guitar Hero Wii controller's unused RJ-11 expansion connector to connect in place of the Wiimote's nunchuck connection.
Print Settings
Printer:
Voron V0.1
Rafts:
No
No
Resolution:
200
15%
Filament: Hatchbox PLA Black
Category: Video Games