Viking Spear with Handle (No Glue Required)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Impress your neighbors with this 3D printed spear. The handle screws into the spear tip and each of the handle pieces.
- Rating
- 5 / 5
- Likes
- 76
- Downloads
- 345
- Makes
- 1
- Views
- 1,359
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution
Looking for a viking spear, but not wanting to deal with glue or non-printed wood poles? Search no further :)
All elements printed with 20% infill and no supports. Using a raft to print the spear tip may also be helpful.
Tighten each of the five screws until the handle orientation and gap is at the desirable placement.
Note: Handle pieces and screws can be repeated for an extra long handle. If screws break to easily increase infill to 30% or above (depending on needed ruggedness). Handles are compatible with my Viking Axe model as seen in the last photo. You will want to use the hollow screws from this project if mixing and matching so that the poles do not split from the elongated screws used in the viking axe project.
Disclaimer: Please handle with care and at your own risk. Do not throw this spear at people or animals. It is for educational, artistic, and prop uses only.