Systainer Interior for Tormek SuperGrind 2000
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Systainer sys3 437 interior for Tormek SuperGrind 2000.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 47
- Makes
- 0
- Views
- 909
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Systainer sys3 437 interior for Tormek SuperGrind 2000.
Printed the bottom inlay in 4 quarters. Full size stl file also available.
It doesnt't fit into a 337 systainer, so I added a cavity to store an additional grinding stone on the bottom to best make use of the additional space. Use a M12x60~80mm bolt to hold it down.
Four 10x3 cylinder magnets are press fit in the anglemaster (WM-200) holder. Ensure to align the magnet's polarity prior to pressing these into place.
The anglemaster holder and holddown are mounted using 4.5x15mm wood screws.
The grading stone is held down using 10x2mm velcro strips.
Printed the inlay with 5% infill, added cylinder modifiers with 100% infill underneath the machine's feet for additional strength.
Onshape document: https://cad.onshape.com/documents/f93d4eeba92171f7af9233c9/w/32c8cc404ea9507b797aec5c/e/c817817481833f5da0ed5035?renderMode=0&uiState=66125e0c5217eb3c0f5ce374
Category: Tool Holders & Boxes