DS212 oscilloscope stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.82 – €1.00 net (excluding VAT)
For file: ds212_0.15mm_PrusamentPLA_MK3S_59m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.91 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 58.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A stand for the miniware DS212 oscilloscope
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 23
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
A simple stand for the DS212 from miniware (see e. g. https://e-design.com.cn/en/Mini-Oscilloscope-DS212-PG9226721) which simplifies the readout of the graph.
Materials I've printed with: PLA and PVB
I printed it a while ago, so I don't remember the exact print settings, but likely it was the default prusa-slicer 0.15 and Prusament preset. It fits very nicely.