1 / 5
Magnetic shelf with embedded magnets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnet-held shelf with embedded magnets, suitable for fridges :)
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 75
- Makes
- 0
- Views
- 439
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
This is a small magnetic shelf I made to hold my tea boxes on the side of my fridge. It's wide and deep-enough for a 9cm x 11cm tin tea box, but can also be used as a spice rack.
It's designed for use with 8mm diameter x 6mm tall magnets (8x6), you'll need 4 of them.
When slicing, insert a pause at the 6.8mm layer (when slicing with 0.2mm layer height), then insert the magnets in the pocket and resume the print.
No supports are required.
Pre-slides model with the Pause at the right place are available for MK4, MK3s+ and Mini (with and without IS).