1 / 5
Kegerator Tap Handle with Magnetic Cards
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix to change the model over to use 3d printed label cards attached via magnets.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 45
- Makes
- 1
- Views
- 388
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I remixed disney7's M3 version of the handle to use magnetic cards for easy swapping.
I used these magnets https://www.amazon.com/gp/product/B07XRQ44VC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
- I measured them to actually be 1.61mm x 6mm so I made the holes 2mm x 6.5mm to allow for easy tolerances.
- I recommend Zap a Gap glue for attaching the magnets.
Print this with the tap handle threads at the top. You may want to enable supports solely for the magnet holes (use organic). This will also give the print some stability.
Use the blank card and add text or images. Use filament swaps or multi-color printing to add text/images at different layer heights.
