Clothes Iron Holder Caddy
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.83 – €5.91 net (excluding VAT)
For file: Clothes Iron Caddy Holder_0.4n_0.2mm_PETG_MK3.5_5h9m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.37 excluding VAT (range midpoint).
- Weight reported by the author
- 77 g
- Print time reported by the author
- 5.15 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Steam Clothes Iron Wall Mount Caddy Holder with Cord Holder
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 163
- Makes
- 1
- Views
- 928
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction and Use Case
I needed a wall-mountable holder for my clothes iron, so came up with this model. My iron is a Black and Decker Self Clean II which is “vintage”, but I suspect this will work for other models.
Printing
I used PETG filament with 0.2mm level height. Organic supports for support enforcers only, and auto-paint the support points.
Installation
Mount on wall using 6-8 x ¾ anchors (3/16 drill size)