Kenwood Prospero Mixer Bowl Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basic Kenwood Prospero Mixer Bowl Base to replace the original one (Or adapt it to a generic bowl and have replacements)
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 24
- Makes
- 0
- Views
- 375
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
My mom accidentally melted her bowl base which allowed the bowl to lock into the mixer and thought she couldn't use her mixer anymore( Replacement stuff for Kenwood is sometimes tricky to get where I live).
So I jumped onto Onshape and created this model to adapt to the original mixers bowl (And maybe other ones too with a little bit of adaptation)
Beware, removing the original base from the bowl is quite difficult, as they use metal tabs inside the injection molded part, and then point solder those tabs to the bowl itself. They break off clean, at least in my case they did, but it does require a lot of effort, and some heavy-duty pliers and a pry bar.
Printed in the provided orientation
- 20% infill
- 0.2 mm layer height
- Supports on
- Support on the build plate only.
Will provide a STEP file to modify at will, and I'll leave the OnShape link also, to copy your version and modify it to your heart's content!