Budget Filament Wall Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Neatly store your filament rolls on your wall for a few bucks.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 308
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Let's organize all our filament for under 5€. For a 2 meter rack, you will need two electrical insulation conduits. For my project I used the “EN 20” model. Each pipe will cost you 1,59€ a piece and can be found at your local hardware store. In Germany, you can find them here:
https://www.obi.de/p/7550171/isolierrohr-starr-en-20-laenge-2-m
For each two meter rack, I printed 4 holders and spaced them ca. 50 cm apart. These pipes are thin and you will notice minimal sag depending on how many supports you use. This can be fixed by stuffing the pipes with tighly balled up newspaper.
Printing settings:
- 0.28 layer height
- 30% infill
- 4 layer walls
- no supports needed
- PETG