Pepe the Frog Drawer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To organize your stuff in the bathroom or wherever you want
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 0
- Views
- 264
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Total Dimensions
Width: 200mm
Depth: 176mm
Height: 226mm
No Support needed!
Layer Height: 0,2mm
To print the frog you need to add filament change in the slicer. Each color is one layer with a hight of 0,2mm. Start with the base color, followed by colors for the toilette, the frog, the outlines and the lips.
I uploaded two versions of the drawer, one with inlays, that fitted the best for me and a clean version, without any inlays.
When everything is printed mount the frame with 3mm countersunk screws and slide the front in the drawer. Then slide the drawer in the frame with an 45° angle.
Let me know if you have any issues with printing or mounting. I will try to help.