Sliding Shower Door Stopper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is a replication, and slight structural modification, of a common door stopper for a sliding shower door.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Settings:
Printer: Prusa MK3S+
Print Orientation for Optimal Strength: To be printed in a vertical orientation with the hole for the screw traveling horizontally through the part.
Filament: PETG
PETG tested and recommended for its potential watertight perimeters.
Layer Hight: 0.2
Infill: 5%-10%
Rectilinear
Exterior Perimeters: 3
Use staggered inner seams for improved watertight nature.
Brim: No
Heated Bed: Recommended
Supports: Yes
Use snug to fit inside screw hole, in vertical print orientation, and result in minimal waste.
Approximated Filament Usage: 1.35m
Approximated Print Time: 36 minutes.