Voron 2.4 Y Endstop Switch Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you are using an umbillical or canbus that goes through the exhaust vent cover then this Y switch holder is for you!
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 174
- Makes
- 2
- Views
- 983
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
If you are using an umbillical or canbus that goes through the exhaust vent cover then this Y switch holder is for you!
You will need -
1x Omron mouse button micro switch, I used the D2F-5L but you should be able to use any switch of the same size.
2x M2x10 self tapping screws to mount the switch
1x standard Mx10 to mount the holder to the motor drive frame
Print with standard Voron settings in ABS or ASA
West 3D link to switch used:
https://west3d.com/products/omron-mouse-button-micro-switch-d2f-01l?_pos=1&_sid=39194a641&_ss=r