donor spool brake for "remix filament spool transfer device"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small brake for the donor spool
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 43
- Makes
- 0
- Views
- 577
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I absolutely love the filament transfer device remix from @_600428. I don't love how the donor spool just spins allowing slack in the filament creating issues.
I designed this for both full size spools (1kg) and half size spools (500g).
You will need 8 M3x20 bolts and 8 M3 nuts, 12 nuts if you glue them in place. The extra 4 nuts will got into the longer of the brake side of the attachment.
Print out two outside sections, 2 short inside sections, and 1 long inside section. Since the way the spool holder supports the spool you will only need to place the longer spool brake on one side.
You will need a sheet of 3mm thick silicone for the brake to work. You can find this on amazon.
Make sure to orient the two halves the correct way, the brake should ride slightly forward of center.
The pictures I have included are simply using folded paper towel until my silicone sheet arrives.