1 / 4
Kreg Track Saw to Festool Dust Collector adapter 27/36mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An Vacuum adapter for Kreg Track Saw to Festool Dust Collectors with 27mm (or36mm) hose
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 125
- Makes
- 0
- Views
- 568
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a version of vacuum port adapter for Kreg track saw and Festool dust collector. I bought a version of this adapter on Etsy but it had obvious design flaws …and broke on first use. This design is similar to my earlier version for Rigid vacuum and it addresses all design flaws of one from Etsy. Here is a short summary:
- The adapter is angled for a more natural hose position reducing friction.
- It attaches to the track saw over the existing port allowing to use thicker walls for strength.
- Smooth internal shape for reduced air resistance.
- It should (in theory) fit 36mm Festool hose… I don't have the hose myself but I took dimensions from an existing Festool dust collector port on a mitre saw… any feedback is welcome.
- Designed for printing without supports.
Printing instructions:
- I would advice against using PLA (or even PETG) for this print and recommend using material with some flex. My personal preference is NinjaTek Cheetah - it is somewhat soft and virtually indestructible. The gcode in the upload is for this material.
- Position model vertically with Festool (narrower) end facing the plate.
- If you slice the model yourself, your slicer may give you a stability warning depending on the material and printer setting …but I chose to ignore it and had no issues :-)
Happy printing!!!