VW Caddy otevírač nákladových dveří / cargo door opener
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Díl pro opravu aktuátoru centrálního zamykání. For repair of central locking actuator.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 582
- Makes
- 2
- Views
- 1,986
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Whitte Automotive 0107314802x 01073148010
VW Caddy, najednou nejdou otevřít zadní dveře nákladového prostoru. Asi je vadný výše zmíněný aktuátor.
Tento aktuátor trpí na selhání výsuvného vrutu (ukroutí se v tenké části závitu). Než to posílat do servisu, a měnit celý díl, je daleko rychlejší vytisknout vadnou součástku.
Přikládám model originálního a upraveného zesíleného vrutu.
I tak ale vrut jednou opět selže. Trvalým řešením je připájení diody na kontakty motorku (viz foto), která slouží jako brzda při zasouvání. Doporučuji se o toto nepokoušet bez předchozích zkušeností.
Tištěno na ležato, alespoň 5 perimetrů
Je nutno to dočistit pilníčkem, ať závit nedrhne. Ideálně přidat olej nebo tuk. Při skládání nezapomeň natáhnout pružinu, která pojezd zasouvá.
Do dvou hodin je auto zase v provozu.
Out of nothing your cargo door won't open. It's likely a fault of the actuator mentioned above.
This module suffers from failures at its weak point. Instead of having it serviced if's faster to just print the faulty component.
Original-like and strengthened models are included.
But you can expect the screw to fail again. The only fix of this faulty design is adding a diode on the motor terminals which acts as a brake while retracting. Don't attempt this without experience.
Print it laying flat, at least 5 perimeters.
You will have to make some final touches with a file, so the thread moves freely. Add some grease and don't forget to pre-wind the retracting spring.
It's a 2 hour job.
KSL 429030