Wardrobe - Kleiderstangenhalter 20mm
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.32 – €0.39 net (excluding VAT)
For file: Kleiderstangenhalter_v1_0.4n_0.2mm_PLA_MK4_22m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.35 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 22.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Holder for clothes rail - Kleiderstangenhalter 20mm
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 107
- Makes
- 0
- Views
- 328
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Kleiderstangenhalter für 20mm Durchmesserstangen. Leichte und einfache Positionierung durch Mittelloch. Innenabstand für die Kleiderstange = Gesamtlänge minus 2x 3,5mm.
Zur Montage: Erst eine Seite Halter verschrauben, dann die zweite Seite mit eingesetzter Kleiderstange anzeichnen. Danach die lose Seite inkl. Kleiderstange herausnehmen und die Angezeichneten Löcher vorbohren. Danach die Stange inkl. beider Halter montieren.
Clothes rail holder for 20mm diameter rails. Easy and simple positioning through center hole. Internal distance for the clothes rail = total length minus 2x 3.5mm.
To assemble: First screw on one side of the holder, then mark the second side with the clothes rail inserted. Then remove the loose side including the clothes rail and pre-drill the marked holes. Then mount the rod including both holders.