Kalih Hotswap Strum Block
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A kalih hotswap switch block to house strum switches
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 89
- Makes
- 1
- Views
- 543
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a block that can be slid into the strum switches housing to house kalih MX hotswap sockets. I don't like soldering to the tiny pins so this instead gives a bigger area to solder as well as the ability to hotswap strum switches.
Simply print out two, clip the hotswap sockets carefully into the switch block recess and solder accordingly. You can then push each switch block through the side of the strum switch housing and then push down and slide to the edge of the strum switch area. Use the underside of the block to tuck cables out the sides.
I don't have any 5 pin switches to test the side pin depth. If you try one and find it doesn't fit consider clipping the plastic pins off your switch or increase the depth yourself in the step file.