1 / 4
Internal Front Servo Winch Bronco 2021 (Beluga)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Internal Winch Mount for Servo Winch in the HB R1001/1002/1003 Beluga (Bronco 2021)
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 69
- Makes
- 1
- Views
- 742
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I made an intenal servo winch mount for the HB Beluga R1001/1002/1003 Bronco 2021 that will replace the front battery tray.
Will fit without any modifications to the body but you will need to make some holes in bumper and bumper mount.
Winch fairlead for the front bumper included in print files.
You need:
- 360 degree servo (40x20mm), i used a MG996R-360
- 25t Servo Winch Wheel + Wire (see picture)
- 2x M3x25mm Screws
- 10x M3x8mm Screws
- 2x M3x12mm Screws
- 2,5mm drill
- 8mm drill
- Sharp knife
Assembly will be pretty straight forward and i don't believe additional instructions will be needed.
I used Prusament PETG Matte Black to print.