TechnoPunk - a Traceur skin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Same Traceur, now shorter and with a circuit-board-inspired design
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 53
- Makes
- 1
- Views
- 648
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This skin replaces the Frame, Lid, Battery Door, and Orange tip of the standard Traceur and adds a top rail. It uses the same grip scales and all of the original internals - if you've already got a Traceur, you can drop in the flywheel cage and firing group from it right into this.
14 M3 Heatset inserts (same kind as regular Traceur) are required to build this with its rail, or you can omit the rail and save 2 inserts.
The orange tip also requires 2 M3 screws (but not any inserts)
You'll also need two ball detents (like on the standard frame)
Printing instructions:
Top: Upside down, no supports needed
Lower: Upside down, some supports needed
Orange tip: Muzzle-up, some supports needed (very small part, maybe 2g of support)
Rail: Flat on the bed
Battery door: Flat on the bed