1 / 2
Samsung Sound Bar Feet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rubber feet for Samsung sound bar
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 38
- Makes
- 0
- Views
- 446
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My Samsung HW-Q600B sound bar was set up on a TV rack but because the rack was not so deep I had to put the sound bar on some taller rubber feet than the one that come on the sound bar. So I came up with these 3 designs, I ended up using the squared ones.
- They are all 10mm tall.
- There's a smaller 60mm diameter circle option.
- An 80mm bigger one.
- The squared one is 80mm deep x 30mm wide.
- Print 2.
- I used TPU, 2 perimiters, 0.3mm layer height and 20% infill. No supports needed.
I put a small hole in the middle and use the wall mount screws that came included in the box to attach the feet to the sound bar, VHB or double sided tape will also work.
Printed on a Prusa MK3S with Printalot Flex Black filament.