PSA Chair Rail Fixing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you have load in your car and want to fix it, you may want to use the existing chair rails. For that I made some…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 115
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
If you have load in your car and want to fix it, you may want to use the existing chair rails. For that I made some kind of a mount for the chair rails in my Citroën Spacetourer (a car from the PSA Group), where I can add a M8 screw and a M8 nut to create a fixing point. Even better if you use a M8 loop instead of a M8 screw.
The hole for the M8 nut is very tight. You may need to use force or heat to insert the nut. This is intentional, to prevent the nut from slipping through when the screw is rotated.
The screw thread of the M8 loop should be about 4 cm long. See picture. Otherwise it will hit the ground before it can press the two components together.
Choose the printing material and infill with care, to get the maximum of robustness. PLA as material may not be the best choice. Remember it is still plastic! Don't expect to hold something heavy in case of a car crash!!! Use it on your own risk.
I created two versions of the bottom part. Version 1 can rotate free and version 2 can only rotate against the clock to remove it.