V4 Ria Can Organizer 2024
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.57 – €0.69 net (excluding VAT)
For file: _TagV4_0.15mm_PLA_MK3S_43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.63 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 43.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Return can organizer
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 36
- Makes
- 0
- Views
- 436
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model which served two purposes. First I (82) worked with early CAD, then SketchUp but both Software were outdated and SketchUp since 2017 gave me nothing but lockups. So I decided to take the step learning FreeCad. I saw my daughter-in-law's cabinet with full of cans. Not thinking long I decided to use this opportunity to design a can organizer and use this project as my learning project for FreeCad. Boy did I take a bite! I have included all my FreeCad files. The Printer is a MK3S+ with some changes I made. The unit is all PLA printed in a 0.4Tip, 0.3 layer height, Perimeter 4, Solid layers T3,B3. Infill 20%, Rectilinear Speed 90 mm/s at 220 first and 225 the other layers. This is the V4 in the picture the upper two units. The lower unit is V1 you can only push the cans in from the front. V4 is for regular cans and Coke cans. I used hot glue to glue all anchors and some drops of Epoxy to glue the two sections together. Make a dry run before you glue it together, it is just like a puzzle. Good luck and happy printing.