Multicolor Spinning Planet Fidget
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spinning fidget toy of a planet that can be printed in place in multicolor even on a single extruder printer.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 188
- Makes
- 0
- Views
- 832
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a spinning fidget shaped like a planet. It is completely print-in-place, no tinkering required. The only specified print settings that must be on are Supports, but they should be touching just the build plate. In CURA this setting is called Support Placement. Select Touching Buildplate and you should be good to go.
If you want a multi-color version that has already been sliced, there is a .gcode file with 10 filament changes to achieve the print shown in the pictures above. I printed the pictured model on an Ender with no problems. Granted, it took a lot of manual filament changes but I'd say it was worth it.
If you want a solid color version or want to do the coloring yourself, there is an STL as well.
Note: It will be easier to print this model with Prusa XL, Bambu Lab with AMS or a printer that can print multi-color/multi-material automatically, but it is very possible to print it on a single extruder.