1 / 1
BTT HDMI5 Display for Bastion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Get KlipperScreen on your Bastion with this mod
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 36
- Makes
- 1
- Views
- 423
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- BSD License
Have you wanted Klipperscreen on your Bastion? Well wait no further. Add to your collection of tiny rubber ducks and get a BTT HDMI5. Then print this mod out and have at it. Print settings are the usual – 4 walls, 30% infill, supports if you feel like it. You'll need six heatsets - four for the bracket and two on your printer's frame. I used M3x6 bolts for everything, but M3x8 should also work. If you're feeling fancy, get a flat ribbon HDMI cable with right angle connectors for your pi (HOQO on Ali are pretty good) and a right-angle USB-C cable.