1 / 2
Filament guide for Prusa Printer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament guide with bearing to provide smoother way for filament from dry box for example.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I had some problems with just printed filament guides, so I created a quick model to add a bearing which helps with smoother filament movement.
What will you need:
- Bearing - 608ZZ 8mm
Used material:
- PLA or PETG
Print settings:
- Part 1: print on side with supports, 0.2mm layer height
- Part 2: print on ‘back’ with supports, 0.2mm layer height
Assemble:
- Put the bearing on part 1 to the bearing holder
- Click in part 2
- Put the filament guide on a printer frame and guide the filament through the hole
Note: was tested on MK3S+, should be ok for any printer from Prusa with same frame.