Nanit camera floor stand brace
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple brace to support the nanit camera floor stand if it breaks between the pipe and leg frame.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 98
- Makes
- 1
- Views
- 606
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
My floor stand broke in the plastic part right where it joins into the pipe, so I whipped this up to do a quick fix. Then 2 more people I know had the same break. Its not perfect, but it works and should work for the 3 leg free standing floor stand or the 2 legged one. Hope you find it helpful!
I printed in White Prusament PETG with supports, concentric top and bottom pattern so the stress concentrations are aligned with the extrusions and 25% grid infill. That may have been overkill on the infill but whatever. Also I would recommend using stainless button head 5mmx20mm screws. Plus nuts and washers. I only used 6 and it seems plenty sturdy but I made holes for 10.
I contemplated countersinking the screw holes and making a better pad on the back for the wall but didn't get to it, maybe if enough people are interested in it and Nanit hasn't changed their design I'll get to it.