"Leaf" Shaped Corner Templates in Various Sizes
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.32 – €4.06 net (excluding VAT)
For file: LR2180-E100-3 Print_0.2mm_PLA_MK3S_3h56m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.69 excluding VAT (range midpoint).
- Weight reported by the author
- 41 g
- Print time reported by the author
- 3.94 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is an extension to the rounded corner templates. There are 16 "leaf" sizes, from 60mm to 200mm.
- Rating
- 0 / 5
- Likes
- 45
- Downloads
- 122
- Makes
- 0
- Views
- 1,309
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
These 16 corner templates are an extension to the LR2180 basic rounded corner set you can find here: Corner Templates for Flush-Trim Bits. I call them “leaf” shaped corners, see the drawing of how these corners are constructed.
All the information you find on the linked page is true for these templates. Also, the guides will work this these templates too.
Dimensions and Sizes
There are 8 sizes with two variants each. You will find all available measurements in the following drawing:
The variant number 2 or 3 is simply the factor by which the distance A is multiplied to build the radius B.
How to Print the Templates
If you are using a Prusa Printer, there is an example project for PrusaSlicer ("LR2180-E100-3 Print.3mf").
- Print the template with PLA (or PETG).
- Select 0.2mm layer height.
- Use the quality setting.
- Print with 3 perimeters to get better rigidity (especially if you use PETG).
- The flat side of the model goes to the printer bed.
- Do not scale the model!
If you like the models, please rate them and leave a comment below. 😄
Explore More from Meti·kumi
Interested in my designs? Browse through my collection of 3D models:
👉 https://metikumi.com/3d-models/
Stay connected on social media for the latest updates and work-in-progress insights: