Photo Box - Studio Box - Light Box - Minimalist - Modular
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Minimalist and Modular Photo Box or Light Box for Photographing Product Listings
- Rating
- 5 / 5
- Likes
- 56
- Downloads
- 384
- Makes
- 2
- Views
- 2,100
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Disclaimer:
I am not responsible for any first layer issues. Talk with your printer about it.
This is a minimalist and modular photo box design that uses a base and two panels. It uses the 3-Way Lighting method and is an excellent way to take simple product photos.
These were all printed on a Bambu A1 bed and will print just fine on any other beds assuming they are level. The panels and base are 250mm square.
Everything was designed to be printed at 0.2mm layer height and 0.4mm nozzle to ensure correct tolerances. Use 100% infill or 5-layer top/bottom walls. I recommend printing slowly at no more than 50mm/s.
Panels and base are 1mm thin and print at 0.2mm layer height. The base panel tracks are ~1.2mm wide to accept a panel. Each panel/base is very cheap to produce.
The panels, base, and cylinder stand can be printed in a variety of different colors to fit your individual needs. I printed mine in PLA Matte Black and Matte White.
When not in use, panels can easily be taken off and stored with the base. This offers a great option for those with little space to work with or when you need to take product photos on-the-go at different locations.