Box with Centrifugal Locks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This took some work to get it work function properly, I tell ya... Total print time for me was 8 hours, 56 minutes.…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 485
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution
This took some work to get it work function properly, I tell ya... Total print time for me was 8 hours, 56 minutes. The hardest part of the print for your machine will be the bearings as they are print-in-place with no support. Simply (and carefully) break them loose with a small screwdriver after the print is done.
I will say it doesn't work exactly perfect. But that I expect is due to the small size of the ball bearings and the fact that they don't have a lot of mass. If they were SLS printed in metal, or replaced with small ceramic/steel bearings (2.79mm, or close. You've got about .41mm clearance on both sides in the bi-stable track), I imagine the function would be much more predictable.
EDIT 1 : Added alternate lids with different Triquetras on the top for a bit of design flare. Might need support to print these unless your bridging is boss-like.
EDIT 2 : Geocaching lids! Groundspeak official, as well as the G-compass. Most certainly will need supports.
EDIT 3 : Traditional Yggdrasil (Tree of Life) lid.
Category: Puzzles