Coin trolley
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.16 – €0.19 net (excluding VAT)
For file: gcode_coin_2-3colors.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.17 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 13.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
These are some examples of a customizable key-ring coin trolley for supermarket carts and lockers
- Rating
- 4.5 / 5
- Likes
- 14
- Downloads
- 109
- Makes
- 2
- Views
- 404
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
TOOLS USED
Slicer: Ultimaker Cura
3Dprinter: Anycubic Kobra 2
COIN FILE - Slicer configuration (14min, 1g)
This design has a tower purge in order to clean the extrusor every time there is a change of filament.
Filament and extrusor
2 PLA of different color (black, blue and/or grey)
Diameter: 0.4mm
Quality
Layer height: 0.2mm
Walls
Wall line count: 4
Z seam alignment: User specified
Z seam position: back
Z seam X: 50mm
Z seam Y: 0mm
Seam corner preference: hide seam
Top/Bottom
Top layers: 2
Bottom layers: 4
Enable ironing
Infill
Infill density: 20%
Material
Printing temperature: 200ºC
Printing temperature initial layer: 200ºC
Build plate temperature: 60ºC
Build plate temperature initial layer: 60ºc
Speed
Print speed: 40mm/s
Infill speed: 40mm/s
Wall speed: 20mm/s
Top/Bottom speed: 20mm/s
Travel speed: 120mm/s
Initial layer speed: 50mm/s
Travel
Enable retraction
Retraction distance: 4mm/s
Retraction speed: 40mm/s
Support
No supports
Build plate adhesion
Build plate adhesion type: skirt
Pluggin
Filament change at layer 10
Filament change at layer 7
COVER01_PLA FILE - Slicer configuration (18min, 2g)
Filament and extrusor
PLA
Diameter: 0.4mm
Quality
Layer height: 0.2mm
Walls
Wall line count: 4
Z seam alignment: User specified
Z seam position: back
Z seam X: 0mm
Z seam Y: 500mm
Seam corner preference: hide seam
Top/Bottom
Top layers: 2
Bottom layers: 4
Enable ironing
Infill
Infill density: 20%
Material
Printing temperature: 200ºC
Printing temperature initial layer: 200ºC
Build plate temperature: 60ºC
Build plate temperature initial layer: 60ºc
Speed
Print speed: 40mm/s
Infill speed: 40mm/s
Wall speed: 20mm/s
Top/Bottom speed: 20mm/s
Travel speed: 120mm/s
Initial layer speed: 50mm/s
Travel
Enable retraction
Retraction distance: 4mm/s
Retraction speed: 40mm/s
Support
Generate supports
Support structure: tree
Maximum branch angle: 70º
Branch diameter: 5mm
Trunk diameter: 25mm
Support placement: everywhere
Build plate adhesion
Build plate adhesion type: skirt
COVER02_TPU FILE - Slicer configuration (26min, 2g)
After several trials this is the best orientation using TPU filament because it has the best results in terms of aestethics, mechanically works fine and the post-processing is very easy and clean.
Filament and extrusor
Red TPU
Diameter: 0.4mm
Quality
Layer height: 0.2mm
Walls
Wall line count: 4
Z seam alignment: User specified
Z seam position: back
Z seam X: 0mm
Z seam Y: 500mm
Seam corner preference: hide seam
Top/Bottom
Top layers: 2
Bottom layers: 4
Enable ironing
Infill
Infill density: 20%
Material
Printing temperature: 200ºC
Printing temperature initial layer: 200ºC
Build plate temperature: 60ºC
Build plate temperature initial layer: 60ºc
Speed
Print speed: 40mm/s
Infill speed: 40mm/s
Wall speed: 20mm/s
Top/Bottom speed: 20mm/s
Travel speed: 120mm/s
Initial layer speed: 50mm/s
Travel
Enable retraction
Retraction distance: 4mm/s
Retraction speed: 40mm/s
Support
Generate supports
Support structure: tree
Maximum branch angle: 70º
Branch diameter: 5mm
Trunk diameter: 25mm
Support placement: everywhere
Build plate adhesion
Build plate adhesion type: skirt
POST-PROCESSING
Cutting all supports and Polish the edged corners
pd: it is a remix from Andyparla's files