Voron 0.* bracket for mounting BTT UC2 Canbus
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This bracket mounts the BTT UC2 to the upper screws Z axis on the backplate of the Voron 0.*
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 66
- Makes
- 0
- Views
- 526
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
If the Canbus adapter U2C from BTT does not fit on a din rail. The mods place the Canbus adapter between the X and Y motor.
Link to the U2C canbus adapter. https://github.com/bigtreetech/U2C
The mod works for the Voron 0.* The upper screws that holds the backplate to the Z axis. Replaced with 2mm longer screws for mounting Part1 to the backplate. Part1_V3 has extra horizontal space for moving the bracket to the left or right.
2 extra nuts and screws (3mm) for fixing Part2 on top of Part1.
Part_V3 more move space then part_v2
Extra added a fan mount
40mm fans
mount against backplate bottom
see picture