1 / 1
Innovv K6 Motorcycle Fairing Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for the Innovv k6 front camera to a fairing
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 47
- Makes
- 0
- Views
- 353
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
You may want to sand the bottom to make it rougher
Use the supplied rubber tape on the camera bump to the top
This has a back stop so the camera doesn't slide to the ear and a tiny bottom mount to take up space left around the mount
Use a bolt to tighten the top so it holds the camera tightly
I recommend printing in ASA. If you use ASA you must use a glue stick and let the print cool down very slowly (at least an hour) otherwise the base will warp
I disclaim any responsibility if this falls off or anything else