1 / 5
Drawing Tablet Desk Stand (Intended for Huion H610X) — image 1
1 / 5

Drawing Tablet Desk Stand (Intended for Huion H610X)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Stand for drawing tablet that lifts it above most keyboards, and tilts it towards you.

Rating
0 / 5
Likes
14
Downloads
78
Makes
0
Views
1,099
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

----

Description

I created this stand because I found reaching over the keyboard to use my drawing tablet quite awkward. Having it towards me and above the keyboard allows me to easily reach the tablet. This is intended for a Huion H610X, but it will obviously work for any tablet that fits on it.

----

Print Settings

  • Supports: When printing parts with holes & pegs, I recommend painting on the supports. I don't like supports inside holes as they are tough to get out and unnecessary. 
  • The Feet: Print in TPU! I used 95A which works great on my glass desk. General TPU tips include using 105% extrusion, 3 top/bottom layers. Keep infill low, 1 to 2 walls/perimeters.
  • All OTHER parts I recommend 4 walls/perimeters, 4 top/bottom layers, & 20-25% gyroid infill.

----

Post Processing

Not much to do here. I super glued all pegs, holes, & feet to make sure the stand is as sturdy as possible.

Tags