Roomba Charger Holder universal power plug notch
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.52 – €3.07 net (excluding VAT)
For file: Roomba Charger Holder universal power plug location_0.2mm_PETG_MINI_2h57m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.79 excluding VAT (range midpoint).
- Weight reported by the author
- 34 g
- Print time reported by the author
- 2.95 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
remixed Roomba Charger Holder, putting the power plug notch on both sides
- Rating
- 4.333 / 5
- Likes
- 9
- Downloads
- 65
- Makes
- 2
- Views
- 461
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I printed the original design in Prusament PETG black at 0.2mm. When I went to install it, I unfortunately realized the power on the charger base of the iRobot Roomba 690 Robot Vacuum plugs in on the right, not the left.
I sliced up the original design in TinkerCad, mirroring the power plug notch to make this more universal.