Cable Bracket for Revolt 3 PC Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket for the bottom-rear of the Revolt 3 PC case, meant to keep cables in place so they don't get caught under edges.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 53
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
I love my Revolt 3 pc case, but the cable management annoyed me; The cables exit from the bottom, and must be routed through the bottom rear of the case or risk getting pinched under the case itself; And with nothing holding the cords in place, you would always have to rearrange them any time you pick up or move the case (which you have to any time you want to plug or unplug something).
So I made this bracket that attaches to the bottom-rear hole of the case, to hold your cords in position so they stay put. The bracket clips onto the power-plug, and then has additional clips to help further stay in position.
I recommend printing with PETG, as you want a little flexibility for installing it and some heat resistance. You can try other filaments, but I don't recommend PLA as this spot does get a bit of heat exhaust from the computer. I did 15% infill Gyroid.