M.C.C - Mechanical Card Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
my cool lookin card case. it's kinda uncomfortable to open but looks cool isn't it?
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 29
- Makes
- 1
- Views
- 430
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
M.C.C mechanical card case - made by me
Push side button to open it
there's slope on backplate so cards can come out apart.. but i should improve it
<it need M3x10*3>
(I recomend to use ‘arachne’ setting for better quality on 0.4mm nozzle but doesn't really matter)
'frontplate' and ‘cardhouse’ should be printed with support(wood, on build plate only)
(should print like this)
can be printed with pla, petg…etc
It doesn't matter what layer height you print at.(bellow 0.2mm)
and the bolts are self tapped in place if printed well enough
(i used bambulab p1s and ender 3 to print those)
ez to assemble… u can assemble as the pictures down bellow
i engraved some words on front and back but u can print without those words by just slicing it
or paint it to print with my logo?s
sorry for my bad english…