1 / 5
Arch headphone stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Arch shaped headphone holder. Its legs can be filled for extra weight.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 38
- Makes
- 0
- Views
- 347
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Arch:
PETG. 0.6 mm nozzle
Layer width: 0.7 mm
variable layer height ~ 0.15-0.30 mm (top and overhang: ≥0.15 mm)
fuzzy skin: contour, 0.3/0.3 mm
Mouse ears on the corners
walls: 2 layers
top/bottom: 4 layers
infill: 10% (in retrospect: denser infill would be better at the very top. I would add a modifier to the top 5-10 mm. Solid infill caused some scraping because the infill wasn't dense enough.)
Plugs:
TPU
0.4 mm nozzle
15% infill
3 walls
Print one, test clearance.
I also glued them in with CA.
Funnel:
PLA
vase mode
I used fish tank gravel as weight.