1 / 3
Supermicro Rack Ear Handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rack Ear Handle for Supermicro Servers. Tested with CSE-829U, should work with others too.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
Printed in PETG with a 0.6mm nozzle and 90% Infill.
You'll also need 2x M4x5mm Countersunk-Screws. If you don't already have some, you should buy the 20mm long ones and cut them to length with a Dremel. (Notice: the Thread should be 5mm long, if you include the Head of the Screw it's around 8mm total)
The Handle works pretty well, I was able to lift a Supermicro CSE-829U (w/o drives) just by the printed Handles. Didn't break yet.
(3rd pic shows the original handle)