Camlock for Dewalt Orbital Sander
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.83 – €1.01 net (excluding VAT)
For file: dewalt-orbital-sander-camlock v3_0.6n_0.3mm_PETG_MK3S_40m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.92 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 40.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Makes Dewalt sanders compatible with PeterH's Camlock vacuum connector.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 93
- Makes
- 0
- Views
- 668
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This allows a Dewalt orbital sander (DWE6421/DWE6423) to connect to Peter H's camlock fitting. It should also be compatible with other dewalt tools that are designed to connect to their dust extractors.
I designed the connector to be attached by filament pushed in to a few holes around the perimeter for retention, but my test print fit so tightly I can't pull it off. I could remove it by breaking the print, then print it again slightly larger to test the retention pins… but that seems wasteful.
I've included the model files for easy modification, in case you want to make it slightly larger.