1 / 3
Launching Pen Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spring loaded pen holder!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 14
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
A pen holder that launches its contents multiple feet into the air!
Requires some hardware for assembly:
4x M3*6mm Bolts
1x M3*12mm Bolts
5x M3 Nut
1x 0.6*9.5*20mm spring
1x 0.8*9.5*50mm spring
The springs I got from a multi assortment on amazon, and same for the M3 hardware.
Printing Tips:
- Print the Piston head down, so that the spring notch is face up.
- Print the Tube vertically with the base down
- Print the Base vertically with the hex holes on the bottom
- Print the Latch on its side