1 / 4
6384 Outrunner Motor Pod. Updated with a beefier version also
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a pod to mount a 6384 outrunner motor.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 153
- Makes
- 0
- Views
- 744
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Updated to keep the front bearing secure without having to epoxy it in.
I designed this motor pod to mount a 6384 motor to a soft top surfboard. The 3 phase wires run internally and I use 12awg silicone wires. I use either ASA or PETG, 100% infill and 6 wall loops. I use M4 bolts that are 16mm long to mount the motor and ¼" stainless hardware to mount the pod to the board.